forum.cncdrive.com

CNC is Axiom PRO 8 . When mounting vice directly onto aluminium base probe will not work. Puck is directly connected to
Axiom. Have spent many hours looking for a solution.

You need a isolated touchprobe or if you are using a rod as touchoff then make it insulated from the spindle - you have a circuit going from your spindle to the bed via a earth circuit.

Thanks it worked

Delco wrote:You need a isolated touchprobe or if you are using a rod as touchoff then make it insulated from the spindle - you have a circuit going from your spindle to the bed via a earth circuit.