Limit switches trigged and stuck
Posted: Thu Aug 05, 2021 4:04 pmI have a problem with my limit switches, I have configured them so they works fine when homing. When running a job and hitting a switch it isn't possible to reset by hitting the button - I got a message saying "The reset logic of the software is active....". The machine is then stuck and I have to turn it off.
Furthermore - when I run a job Fusion 360 generates G53 G0 Z0 and when I have a high working height the Z is triggered and the machine is stuck.
Furthermore - when I run a job Fusion 360 generates G53 G0 Z0 and when I have a high working height the Z is triggered and the machine is stuck.