RHINOCAM post porcessor

If you have a question about the software please ask it here.

RHINOCAM post porcessor

Postby Breizhmaker » Sun Jan 31, 2021 10:01 am

hello,

question in the title...

Is there a dedicated postpro for Rhinocam mill / UCCNC ?

if no specific one, what is the best existing one to with UCCNC ?

Thanks for yours answers

Regards

Thierry
User avatar
Breizhmaker
 
Posts: 6
Joined: Fri Nov 29, 2019 2:09 pm

Re: RHINOCAM post porcessor

Postby cncdrive » Sun Jan 31, 2021 5:13 pm

I'm not familiar with that CAM software, but the UCCNC is basically compatible with Mach3/4, I mean it understands the same RS274NGC programming language.
So, a MAch3 post processor should work. There might be a need for minor syntax modifications, but usually an of the shelf Mach3 post processor works just fine without any modifications.
cncdrive
Site Admin
 
Posts: 4887
Joined: Tue Aug 12, 2014 11:17 pm

Re: RHINOCAM post porcessor

Postby Derek » Wed Feb 03, 2021 1:06 pm

It's mostly the same as Mach3. If you are doing rigid tapping there is some customization you will need to do.
Derek
 
Posts: 341
Joined: Mon Sep 05, 2016 9:57 am

Re: RHINOCAM post porcessor

Postby Breizhmaker » Fri Feb 05, 2021 10:14 pm

Thank you guys for your answers !
I'll test this WE
regards
Thierry
User avatar
Breizhmaker
 
Posts: 6
Joined: Fri Nov 29, 2019 2:09 pm


Return to Ask a question from support here

Who is online

Users browsing this forum: No registered users and 42 guests