Machine Coordinates Moving Not Router

[taawad]

I put a new Z motor with new wires into the driver and still it won't move, no difference between new vs old motor is it something within the software? and also is the LED of motor should be enabled by the signal even when the motors don't move on the controller or just when it physically moves?

[RsX]

I can't seem to find anything wrong with the wirings.
There is no enable, the SSRs are ON, the PSUs are ON, the drivers are green (LED), I can't see the driver's connectors clearly but, as far I can see, Black and Green are GND and connected to DIR- and PUL-.
As to why the motors are not enabling, I have no idea. There is nothing suggesting they wouldn't be powered on.

[sebba]

Yeah, very strange, indeed.
Are you sure your axis are properly configured?
Step and dir pins and ports for each motor. Maybe you lost your settings in profile file.
Your inputs are working properly, also? Inputs like limit/home switches, if you use them.

[arturod]

I see you are using a C94 and the green LED is not lit, which means the system is not active. Maybe it is not configured correctly or something is triggering a fault signal. You can find more information here:
https://www.cnc4pc.com/blog/post/initia ... with-uccnc

Arturo Duncan
https://cnc4pc.com