Random trouble with G31
Posted: Tue Sep 05, 2017 7:05 pmHello,
Some times (At least once a day), i get a strange behaviour when running G31 : the machine stops like it had touched something with the probe, but as soon as the descending Z movement starts, generally 3 cm over the target.
I placed a big large square on the main screen which lit when the probe is hit, in place of the UCCNC logo on the top right,.
I assure you that this big square does not lit in the case.
The only way to get everything back to normal behaviour is to reboot the PC. Not a too big deal.
I assure you i removed any useless software : no automatic updates (flash, windows, adobe reader, skype, team viewer etc...), and no program is started at boot.
The pc is fully dedicated to uccnc. It's a big proc, big ram, win7 64.
Surely, i manually started some program, like firefox or thunderbird or anything which interfere. I use Cambam and Vcarve Desktop.I want to signal that just in case somebody got a clue.
Seb
Some times (At least once a day), i get a strange behaviour when running G31 : the machine stops like it had touched something with the probe, but as soon as the descending Z movement starts, generally 3 cm over the target.
I placed a big large square on the main screen which lit when the probe is hit, in place of the UCCNC logo on the top right,.
I assure you that this big square does not lit in the case.
The only way to get everything back to normal behaviour is to reboot the PC. Not a too big deal.
I assure you i removed any useless software : no automatic updates (flash, windows, adobe reader, skype, team viewer etc...), and no program is started at boot.
The pc is fully dedicated to uccnc. It's a big proc, big ram, win7 64.
Surely, i manually started some program, like firefox or thunderbird or anything which interfere. I use Cambam and Vcarve Desktop.I want to signal that just in case somebody got a clue.
Seb