forum.cncdrive.com

Posted: **Sat Sep 23, 2023 2:43 pm**

my probe routine uses g91 to ensure correct direction movement.
if stopped mid probe and then the machine is re homed the z axis will go beyond the home switch- without homing and backing off.

Posted: **Sat Sep 30, 2023 4:29 pm**

can this issue be solved or will i have to re write the button code to switch to g90? before pressing the buttons

Posted: **Sat Sep 30, 2023 6:36 pm**

Dezsoe, please help here.
Batwell, it would be great if you could upload your probing macro.

forum.cncdrive.com

homing issue after cancelling probing routine.

homing issue after cancelling probing routine.

Re: homing issue after cancelling probing routine.

Re: homing issue after cancelling probing routine.