forum.cncdrive.com

i am running an axbb-e and with 2.111 all perfect.

thought i would test the newer version due to the screen setup but i have issues with the
mist-coolant setup that use the m3-m4 relay option.

they just dont work. the spindle starts as it should when i select cw etc but when i select
mist nothing ( i use that as the relay for the vac )

mist is m7
coolant is m8

not 3 and 4

yes i understand that and tested m3 - m4 - m7 - m8 same issue

when i setup my pin allocation of pin3 port 1 to any of the m3 - 4- 7 - 8 they do not trigger the relay

when having exact same setup inputs in 2.111 it works flawlessly since the day i set it all
up. then with 2.113 -2.115 they do not work