Outside Probe Function
Posted: Sat Jun 04, 2022 9:15 pmAttempted to carry out an outside probe today, and it seemed to fail.
Set P1 (X) to 22, P2 (Y) to 22 and C-10
set the probe roughly in the centre.
Hit Probe and it moved P2 (Y) direction by 22, dropped Z by 10mm.
Then nothing, didn't move at all.
Thoughts?
Set P1 (X) to 22, P2 (Y) to 22 and C-10
set the probe roughly in the centre.
Hit Probe and it moved P2 (Y) direction by 22, dropped Z by 10mm.
Then nothing, didn't move at all.
Thoughts?