Skipping M30
Posted: Thu Oct 22, 2020 2:47 amI'm running version 1.2111
One profile works, the other skips the M30 macro
One profile works, the other skips the M30 macro
forum.cncdrive.com
UCCNC machine control software support forum
https://forum.cncdrive.com/
Skipping M30
Page 1 of 1
Posted: Thu Oct 22, 2020 2:47 amRe: Skipping M30
Posted: Thu Oct 22, 2020 11:41 pmIs there an M30.txt in the macro folder?
Re: Skipping M30
Posted: Fri Oct 23, 2020 12:52 amGer, you are amazing. It is not your screen set that has the issue. I made a dumb screen set that I use for simple profile cutting. This a base profile has the issue. I copied the m200 script with some modifications into the M30, and it skipped it. I then moved the code to the M9 and now I am getting the z raise and park at the end of my program. Someone on the Facebook group said this is a known issue with this version.