forum.cncdrive.com

Posted: **Fri Mar 08, 2019 9:30 am**

I am testing version 1.2109.
After running GCode "M30"-Command will not be executed.
Only if entered in MDI.
In version 1.2049 is correct.

Posted: **Fri Mar 08, 2019 9:42 am**

I have checked and you are right. I mean the M30 program end end rewind function works fine, but the M30 custom macro file does not execute in version 1.2109.
I have checked the UCCNC associated code and the issue is there, I have made the correction, it will work in the next release.

Posted: **Fri Mar 08, 2019 9:46 am**

Thank you very much

forum.cncdrive.com

Ver. 1.2019 - M30 not work from G-Code

Ver. 1.2019 - M30 not work from G-Code

Re: Ver. 1.2019 - M30 not work from G-Code

Re: Ver. 1.2019 - M30 not work from G-Code