Why i try to run loaded gcode i get window for "initial movement preperation".
Unfortunately the buttons below are not visible and i do not know which button to press.
See screenshot attached.
Button not visible
3 posts
• Page 1 of 1
Button not visible
by mr_cg » Sat Mar 23, 2019 5:20 pm
I am using stock Screenset from Stepcraft.
Why i try to run loaded gcode i get window for "initial movement preperation".
Unfortunately the buttons below are not visible and i do not know which button to press.
See screenshot attached.
Why i try to run loaded gcode i get window for "initial movement preperation".
Unfortunately the buttons below are not visible and i do not know which button to press.
See screenshot attached.
- mr_cg
- Posts: 48
- Joined: Thu Mar 14, 2019 8:40 pm
Re: Button not visible
by ger21 » Sat Mar 23, 2019 5:33 pm
Do you have Windows set to use "Large Fonts", or more than 100% font size?
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
- ger21
- Posts: 2714
- Joined: Sat Sep 03, 2016 2:17 am
Re: Button not visible
by mr_cg » Mon Mar 25, 2019 7:46 pm
By chaning the font size from 125% to 100% to buttons are visible. 
It would be great if the windows would be scaled correctly independent which font size is used.
Only because of UCCNC i need to change the global setting now to 100%.
You can mark the topic as solved. Thanks for support.
It would be great if the windows would be scaled correctly independent which font size is used.
Only because of UCCNC i need to change the global setting now to 100%.
You can mark the topic as solved. Thanks for support.
- mr_cg
- Posts: 48
- Joined: Thu Mar 14, 2019 8:40 pm
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 4 guests