Mach4 Lathe with UC100

[jef.maas@telenet.be]

I've been working with mach3 lathe for years.
No problems with a spindle motor with 3 pulleys (3 speeds) 0 to 181 ; 181 to 718 and 718 to 2750
I work with 1 index for controlling the speed on my motor.
Bought a Mach4 that works with a UC100.
It doesn't work in Mach4. No feedback from my frequency inverter.
Work with 0-10 volts. How do I set up Mach4 and UC100 to make it work like in Mach3.

Sorry for my English translations via Google translate. My language of instruction is normally Dutch.

Best regards,

Jef Maas

[cncdrive]

Yes, plasma THC control, spindle syncronised motion for thread cutting and rigid tapping do not work in our Mach4 plugin, these only work in Mach3 and UCCNC.