forum.cncdrive.com

Posted: **Sat Sep 21, 2019 1:44 am**

Using teh UC300eth with mach3 and the UCCNC plugin DOES the THC function work ?? Or was it not included in teh plugin?

(;-) TP

Posted: **Sat Sep 21, 2019 2:19 am**

Posted: **Thu Sep 26, 2019 8:39 am**

How do you turn THC on?

I've tried doOEMButton with OEM code 123, startTHC and even THCon (which I know doesn't work even with the parallel port)

Thanks

Posted: **Thu Sep 26, 2019 9:46 am**

With the THC button on the screen?!

But we have always used the UCCNC and it has an M code to turn the THC on/off.
You will have to ask machsupport about how to do that in mach3.

Posted: **Thu Sep 26, 2019 10:34 am**

I hoped it was clear I know how to turn THC on in Mach3. I also hoped it was clear that none of the methods I stated work when using the plugin for the UC300ETH.

I got the plugin from your site so I was hoping you may have some insight into why none of the available methods in Mach3 appear to work.

Posted: **Thu Sep 26, 2019 12:07 pm**

I don't know sorry. It works at us with the THC button.

Posted: **Thu Sep 26, 2019 1:07 pm**

Which screenset are you using?

Posted: **Thu Sep 26, 2019 2:46 pm**

The default plasma screen.

Posted: **Fri Sep 27, 2019 7:51 am**

progress - wiped Mach3 - clean install and of plugin. Now working.

Posted: **Mon Sep 30, 2019 5:18 pm**

The controller works with version 2.63

forum.cncdrive.com

Using Mach3 with UC300eth

Using Mach3 with UC300eth

Re: Using Mach3 with UC300eth

Re: Using Mach3 with UC300eth

Re: Using Mach3 with UC300eth

Re: Using Mach3 with UC300eth

Re: Using Mach3 with UC300eth

Re: Using Mach3 with UC300eth

Re: Using Mach3 with UC300eth

Re: Using Mach3 with UC300eth

Re: Using Mach3 with UC300eth