Re: UCCNC Load from Image function
Posted: Sat Mar 11, 2017 2:24 pmCode ? Macro??
forum.cncdrive.com
UCCNC machine control software support forum
https://forum.cncdrive.com/
UCCNC Load from Image function
Page 1 of 1
Posted: Sat Mar 11, 2017 2:24 pmRe: UCCNC Load from Image function
Posted: Sun Mar 12, 2017 5:01 pmDo you generate GCode from the BMP file? Or you have generated bitmaps for the GCode files?
Re: UCCNC Load from Image function
Posted: Mon Mar 13, 2017 6:36 amdezsoe wrote:Do you generate GCode from the BMP file? Or you have generated bitmaps for the GCode files?
Szia Dezsö. You can use F-Engrave to do that. It is extremely flexible and can do much more and is free.
http://www.scorchworks.com/Fengrave/fengrave.html
Re: UCCNC Load from Image function
Posted: Mon Mar 13, 2017 10:06 amA_Camera: Thank you for the link! Good program, I'll check it later.
Vmax549: Thank you! I only wanted to know if it reads GCode and displays it, or it only loads bitmaps.
Vmax549: Thank you! I only wanted to know if it reads GCode and displays it, or it only loads bitmaps.