X axis exact center
Posted: Thu Aug 18, 2022 12:21 pmHi, I have been learning UCCNC for about a month. Is there a command I can put in the MDI field to tell the X axis to move to its exact center along the X axis on the spoilboard? Thanks.
forum.cncdrive.com
UCCNC machine control software support forum
https://forum.cncdrive.com/
X axis exact center
Page 1 of 1
Posted: Thu Aug 18, 2022 12:21 pmRe: X axis exact center
Posted: Sat Aug 20, 2022 1:44 pmIf you know the max travel then in the mdi just put in the axis you want and the distance.
Re: X axis exact center
Posted: Sun Aug 21, 2022 10:38 amAs Charliem says if your spoil board is say 24" wide simply type GO X12.0 in MDI and it will move 12" to the centre.
Re: X axis exact center
Posted: Sun Aug 21, 2022 10:40 amIf you know the max travel then in the mdi just put in the axis you want and the distance.
Sorry I meant enter 1/2 the max travel