NEED HELP! UCCNC Software on Surface Grinder
Posted: Wed May 18, 2022 7:33 pmI recently had a Harig 612 Surface Grinder retrofitted into a 3-axis CNC machine. The control on the machine is a M3X system using UCCNC software. The Y-axis moves the wheel up and down, the Z axis moves the table in and out, and the X-axis moves the table left and right.
I need some help building our first PGM(s). As far as the Grinder goes, I'm only familiar with the Harig EZSurf 1control, which are much different than what we're dealing with now. I do have experience with G-Code programming. I need to develop PGM's for wheel roughing and dressing, as well as a main grind PGM. Any info would be helpful! Thank you!
I need some help building our first PGM(s). As far as the Grinder goes, I'm only familiar with the Harig EZSurf 1control, which are much different than what we're dealing with now. I do have experience with G-Code programming. I need to develop PGM's for wheel roughing and dressing, as well as a main grind PGM. Any info would be helpful! Thank you!