forum.cncdrive.com

UCCNC machine control software support forum

Skip to content

New member first post

Post anything you want to discuss with others about the software.
Post a reply

New member first post

Postby Derek » Mon Sep 05, 2016 10:01 am

Hi
Moving over from CNCzone. Read that the first post needed to be approved so I wanted to get that out of the way.

Thanks
Derek

Edit: Others should feel free to use this topic as their first post. Less clutter:)
Derek
 
Posts: 341
Joined: Mon Sep 05, 2016 9:57 am
Top

Re: New member first post

Postby bpratl » Mon Sep 05, 2016 11:41 am

Derek wrote:Hi
Moving over from CNCzone. Read that the first post needed to be approved so I wanted to get that out of the way.
Thanks
Derek
Edit: Others should feel free to use this topic as their first post. Less clutter:)


Also my first post on this site and I just started to set up UCCNC with the UC400ETH controller. Bob
UC400ETH,W7 - lathe G0602
UC300ETH/M44B/C62 - mill G0619 - 4 axis (in process)
bpratl
 
Posts: 12
Joined: Fri Jun 03, 2016 9:29 am
Location: Gloucester, MA, USA
Top

Re: New member first post

Postby CT63 » Mon Sep 05, 2016 2:19 pm

Just posting to get my account opened.
CT63
 
Posts: 124
Joined: Sat Sep 03, 2016 11:19 pm
Location: Connecticut, USA
Top

Re: New member first post

Postby mphel » Mon Sep 05, 2016 8:16 pm

Me too... :D
Mark
mphel
 
Posts: 28
Joined: Sat Sep 03, 2016 8:47 pm
Location: Upton-upon-Severn uk
Top

Re: New member first post

Postby Kelevra » Tue Sep 06, 2016 8:15 am

Hook me up aswell please ;)
Running an ETH400 at the moment.
Kelevra
 
Posts: 17
Joined: Tue Sep 06, 2016 8:13 am
Top

Re: New member first post

Postby Karlberg » Tue Sep 06, 2016 12:14 pm

My first post as well :D :D
Karlberg
 
Posts: 1
Joined: Tue Sep 06, 2016 12:11 pm
Top

Re: New member first post

Postby stampsm » Tue Sep 06, 2016 6:34 pm

I'll follow the first post example here also :P
stampsm
 
Posts: 3
Joined: Tue Sep 06, 2016 6:28 pm
Top

Re: New member first post

Postby lp_felix » Thu Sep 08, 2016 11:20 am

Hi, i came from cnc zone,
im user of UCCNC 300 5LPT
lp_felix
 
Posts: 26
Joined: Tue Sep 06, 2016 3:11 pm
Top

Re: New member first post

Postby Battwell » Sun Sep 25, 2016 8:18 pm

Me too
Loving uccnc software
Uc300eth on router and mill.
UK uccnc powered machine sales. https://cncrouter.uk/atc-cnc-routers.htm
Automateanything/duzzit cnc/mercury cnc
Battwell
 
Posts: 867
Joined: Sun Sep 25, 2016 7:39 pm
Location: South Wales. Uk
Top

Re: New member first post

Postby bubba58 » Thu Oct 06, 2016 12:31 am

First post. Looking to change to UCCNC with a UC300ETH
bubba58
 
Posts: 1
Joined: Thu Oct 06, 2016 12:07 am
Top
Next
Post a reply

Return to General discussion about the UCCNC software

Who is online

Users browsing this forum: No registered users and 11 guests

Powered by phpBB® Forum Software © phpBB Group