Retrofit build list please advise.
Posted: Wed Dec 11, 2019 7:48 pmI’m have enjoyed reading so much information so far and I am looking at upgrading a 10x5 Multicam router.
The router works but is running on serial connection and Windows XP’s
I would like to keep the nema34 5.5amp stepper motors.
So I have compiled a list of items I think I need for it all to work I intend on keeping the current limit switch and sensors along with emergency stop features. So the main items I think I need is the power supplies and items to run everything else please can anyone advise if I am missing. Something basic or not so.
Items required are as such.
UC300ETH-5LPT + UCBB breakout board + 2xIDC26-IDC26 cables + free UCCNC license key
€200
2x 48vdc transformers. €80 (each)
Din rail transformer
12v. €25
24v €25
5v €25
Stepper driver
Dm860d x4. €69 (each)
Thanks for all advice in advance
The router works but is running on serial connection and Windows XP’s
I would like to keep the nema34 5.5amp stepper motors.
So I have compiled a list of items I think I need for it all to work I intend on keeping the current limit switch and sensors along with emergency stop features. So the main items I think I need is the power supplies and items to run everything else please can anyone advise if I am missing. Something basic or not so.
Items required are as such.
UC300ETH-5LPT + UCBB breakout board + 2xIDC26-IDC26 cables + free UCCNC license key
€200
2x 48vdc transformers. €80 (each)
Din rail transformer
12v. €25
24v €25
5v €25
Stepper driver
Dm860d x4. €69 (each)
Thanks for all advice in advance