forum.cncdrive.com

Can I import a configuration file from Mach3 to use the configuration in UCCNC?

Any help is greatly appreciated!

Look here
https://www.youtube.com/watch?v=YuY6OnW ... ATQ8bg558w
https://cncdrive.com/UCCNC.html

MACH3.xml profile import

Cheers

Andrew

While it can import Mach3 .xml files, you may still need to do some configuration yourself, as they are two different programs, with different settings. Some things will import, others may not.

Thank you so much! I will give it a go...