forum.cncdrive.com

UCCNC machine control software support forum

Skip to content

MACH3 configuration Import

Post anything you want to discuss with others about the software.
Post a reply

MACH3 configuration Import

Postby daydreamn1134 » Thu Aug 08, 2019 9:50 pm

Can I import a configuration file from Mach3 to use the configuration in UCCNC?

Any help is greatly appreciated! :)
daydreamn1134
 
Posts: 7
Joined: Thu Aug 08, 2019 9:47 pm
Top

Re: MACH3 configuration Import

Postby thegreatwaldo » Fri Aug 09, 2019 9:59 am

Look here
https://www.youtube.com/watch?v=YuY6OnW ... ATQ8bg558w
https://cncdrive.com/UCCNC.html

MACH3.xml profile import

Cheers

Andrew
thegreatwaldo
 
Posts: 177
Joined: Tue Sep 06, 2016 8:28 pm
Top

Re: MACH3 configuration Import

Postby ger21 » Fri Aug 09, 2019 10:42 am

While it can import Mach3 .xml files, you may still need to do some configuration yourself, as they are two different programs, with different settings. Some things will import, others may not.
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2714
Joined: Sat Sep 03, 2016 2:17 am
Top

Re: MACH3 configuration Import

Postby daydreamn1134 » Tue Aug 13, 2019 6:39 am

Thank you so much! I will give it a go...
daydreamn1134
 
Posts: 7
Joined: Thu Aug 08, 2019 9:47 pm
Top
Post a reply

Return to General discussion about the UCCNC software

Who is online

Users browsing this forum: Bing [Bot] and 28 guests

Powered by phpBB® Forum Software © phpBB Group