forum.cncdrive.com

Posted: **Sat Mar 02, 2019 6:52 pm**

Hi all,

makes sense to use UCCNC with UC400ETH under the control from Windows 10-64bit? My old PC has gone to nirvana and I need a new computer. The old pc ran under Windows 7-32bit without any problems. But W7 is an old system. Are any problems to be expected or known?
Thanks for infos.

Cheers
Peter

Posted: **Sat Mar 02, 2019 7:10 pm**

No problems with that.
All Win XP, 7, 8, 8.1 and 10 are supported, all 32 and 64 bits versions of them.

Posted: **Sat Mar 02, 2019 7:36 pm**

I've never run UCCNC on anything other than Windows 10.

Posted: **Sat Mar 02, 2019 8:23 pm**

Hi Balazs, Hi Gerry,

thanks for your replies. I'm very proud to hear from the masters of UCCNC and the Screenset 2017

The combination from these two professional things is the best I ever used!

I start installing win10 immediately...

Cheers
Peter

Posted: **Sat Mar 02, 2019 10:51 pm**

Thank you Peter.

forum.cncdrive.com

UCCNC and Win10

UCCNC and Win10

Re: UCCNC and Win10

Re: UCCNC and Win10

Re: UCCNC and Win10

Re: UCCNC and Win10