forum.cncdrive.com

Posted: **Sat Oct 22, 2016 7:48 pm**

I just need G41/G42.
Have no use at all for the others you mentioned.

Posted: **Mon Oct 24, 2016 8:39 am**

ger21 wrote:I just need G41/G42.
Have no use at all for the others you mentioned.

+1

Posted: **Wed Feb 07, 2018 10:39 pm**

Vmax549 wrote:Here are some of the gcodes I still miss when running UCCNC. NOT in any specific order

Parametric Gcoding as G1 X[#1 * 2.035] where teh axis call is a calculation or X- [#1*2.035] where teh - is a directional call

What things are you guys missing ??????

(;-) TP

Yeah I wish something like G1 Z[#1+1.5] was valid. I am new to UCCNC , but there is no way to add say an `offset like this "in line"....I would have to do it like:
#1=2.5 (for example)
#2=[#1+1.5]
G1 Z#2

forum.cncdrive.com

Gcodes I miss using UCCNC

Re: Gcodes I miss using UCCNC

Re: Gcodes I miss using UCCNC

Re: Gcodes I miss using UCCNC