forum.cncdrive.com • View topic - Check boxes "on the fly"

Page 1 of 1

Check boxes "on the fly"

Posted: Sat Feb 10, 2018 7:10 pm

by Alberto FUL

Would bene possibile to change the state of checkboxes while g-code is running?

Re: Check boxes "on the fly"

Posted: Sat Feb 10, 2018 7:55 pm

by dezsoe

You have the function to change the state the same way as on load. You can call it from g-code as Mxxx or write a macroloop.

Code: Select all: AS3.Setcheckboxstate(NewStateBool, CheckBoxNumber);