Probe tool issue

[dezsoe]

Hi Morfeus80,

Thanks for the debug file, it helped a lot. You are absolutely right, it's a bug. The Ref. current does not count with the corrections (gage and/or diameter). I have to fix it, I'll be back soon.

[Morfeus80]

Thanks dezsoe,
I am looking forward to get the fix.

[dezsoe]

Hi Morfeus80,

I think I have a working version. Please, test it and write some feedback.

Watching the movements when the tool returns to the starting position I beleive I'll have to stop the tool a bit above the workpiece, but it needs one more input field to set the distance. Using and removing a gage while the machine is probing seems to be much safer now, so I understand why you need it...

[Morfeus80]

Thanks dezsoe,
I will be able to do some tests at the beginning of next week.

I will update you.

[dezsoe]

OK, thanks.

[Morfeus80]

Hi dezsoe,

I have tested the the version you sent and I confirm that it is working properly!

Thanks and don't forget to add this to the new UCCNC version.

[dezsoe]

Hi, thanks!