Good evening,
I am new to CNCing. I am running UCCNC software with a stepcraft M1000 machine. When I execute a gcode file I have been having an issue with uccnc shutting down. I get a memory could not be read error and the program shuts down mid cycle. Any one out there who can help me out? I appreciate all assistance.
Travis
Uccnc shuts down mid cycle
4 posts
• Page 1 of 1
Uccnc shuts down mid cycle
by starclassic2013 » Fri Mar 04, 2022 6:08 am
- starclassic2013
- Posts: 3
- Joined: Fri Mar 04, 2022 6:00 am
Re: Uccnc shuts down mid cycle
by ger21 » Fri Mar 04, 2022 12:17 pm
Can you post a screenshot of the error, and the specs of your PC?
My first guess would be the PC's graphics card.
My first guess would be the PC's graphics card.
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
- ger21
- Posts: 2714
- Joined: Sat Sep 03, 2016 2:17 am
Re: Uccnc shuts down mid cycle
by cncdrive » Fri Mar 04, 2022 2:01 pm
Try to update your video card drivers.
And if it has shared video memory then make sure to have at least 512MByte VRAM.
And if it has shared video memory then make sure to have at least 512MByte VRAM.
- cncdrive
- Site Admin
- Posts: 4887
- Joined: Tue Aug 12, 2014 11:17 pm
Re: Uccnc shuts down mid cycle
by starclassic2013 » Mon Mar 07, 2022 6:57 am
Thanks. It was definitely my graphics card. Computer wasn’t powerful enough. I got a gaming laptop and have fixed the issue thanks for the help.
- starclassic2013
- Posts: 3
- Joined: Fri Mar 04, 2022 6:00 am
4 posts
• Page 1 of 1
Return to General discussion about the UCCNC software
Who is online
Users browsing this forum: No registered users and 40 guests