Xbox360 controller configuration

[LLF23]

Hello Guys,

This is my first post here, but I asked for help on the UCCNC Users Facebook page, and I already got a start of a response.
I made a retrofit on old Isel CNC with UC400ETH and (of course) UCCNC.

I bought a used xbox 360 controller, and today, i try it.
After activating the plugin, I have signal (green light) but not for all buttons. Pictures below, see you assignment buttons in UCCNC :

I have signal for buttons [0 to 7] [9] and [12 to 15]
But i don't have signal (no green lights) for 8, 10 and 11 buttons.

My question is :
- UCCNC doesn't use 8, 10 and 11 buttons ?
or
- Is my controller working properly ? (is not new, it's used)

Does it possible to use this buttons for action or not ?

Thanks for your help

[LLF23]

Hello guys,

I got help from Chris Smith on the UCCNC FB page.
I installed CraftyCNC xbox plugin http://www.craftycnc.com/plugins-for-uccnc/, and everything is fine, great !!