Page 1 of 1
AXBB-E no boot response
Posted:
Tue Jul 11, 2023 11:32 pmby survtech
My AXBB-E has worked flawlessly for the last fifty weeks but will no longer boot.
The 5 volt supply is fine but when powering up there is no visual response at all - no led action.
Re: AXBB-E no boot response
Posted:
Wed Jul 12, 2023 11:11 amby ger21
What about the 24V supply?
Re: AXBB-E no boot response
Posted:
Thu Jul 13, 2023 12:35 amby survtech
24Volt is fine led active
Thanks Gerry
Re: AXBB-E no boot response
Posted:
Wed Jul 26, 2023 12:26 amby cncdrive
What do you mean "no longer boot"?
What are the LEDs state?
Did you try to reset it with the reset button as described in the users manual?
Re: AXBB-E no boot response
Posted:
Wed Jul 26, 2023 12:33 amby survtech
"No longer boot" means that the boot-loader is dead.
With boot-loader dead, there are no status lights on the 5-volt rail.
Yes, re-set was first approach.
5-volt side was dead, AXBB-E was replaced under warranty.
The 5-volt power supply arced to ground (earth), I suspect that caused a spike.
Thank you for your help with this.
Mike
Re: AXBB-E no boot response
Posted:
Sat Jul 29, 2023 6:47 pmby cncdrive
Well, I don't understand, so your problem was solved now?
I mean you wrote the AXBB-E was replaced in warranty, so I guess the issue was solved?