Switching from USB Motion card to AXBB-E
Posted: Tue Jan 18, 2022 3:48 amHi Everyone, first time here.
I have an Omni CNC that has a USB motion card and it has since lost its X drive so I am swapping it out for an ethernet motion controller.|
I am having trouble understanding how the ports from the USB motion card transfer to the AXBB-E.
From what I can see:
It seems I might need to use a common ground on the AXBB-E.
I cant see where spindle control (fwd) and (REV) live on the AXBB-E
Picture of my current controller attached.
[img][/img]
TIA
I have an Omni CNC that has a USB motion card and it has since lost its X drive so I am swapping it out for an ethernet motion controller.|
I am having trouble understanding how the ports from the USB motion card transfer to the AXBB-E.
From what I can see:
It seems I might need to use a common ground on the AXBB-E.
I cant see where spindle control (fwd) and (REV) live on the AXBB-E
Picture of my current controller attached.
[img][/img]
TIA