AXBB-E power outputs

This Section is for users to discuss hardware

AXBB-E power outputs

Postby RsX » Sun Oct 27, 2024 2:56 pm

Hello,
the AXBB-E has two "Power Out" pins, 5V+ and 5V0, which are used to provide a reference for the pots attached to the analog inputs.
Are these pins just connected to the Power inputs pin 5V+ and 5V0, or do they have some kind of filter/isolation in between?
In particular I'd like to know if 5V0 can be used to drive one isolated input or doing this can interfere with the reference voltage of the pots.
AXBB-E analog.jpg
RsX
 
Posts: 11
Joined: Fri Oct 25, 2024 9:22 pm

Re: AXBB-E power outputs

Postby cncdrive » Mon Oct 28, 2024 6:04 pm

These are just connected to the power pins.
cncdrive
Site Admin
 
Posts: 4867
Joined: Tue Aug 12, 2014 11:17 pm


Return to Hardware

Who is online

Users browsing this forum: No registered users and 1 guest

cron