QuickView Plugin

[dezsoe]

I really don't understand. It works for me correctly, so it seems that it's ok in Hungary (I tried 3 ISPs). I'll ask my provider tomorrow about it. I uploaded the whole thing to my test server at home. Could you please check if it works?

http://kredenc.onmypc.net/net/uccnc_qui ... ex_en.html

[andrewbishop66]

Hi worked ok for me from your home server but not from the first link

Thanks Andrew

[dezsoe]

Thank you for your information!

It's really a joke that I pay for my domain and it is not accessible from anywhere. My home test server with a free dynamic DNS provider works fine.

[A_Camera]

Same here. Works from the new link but not the other one. Have no time to try it tonight, but will try it tomorrow.

Thank you once again. It seems like a very useful plugin.

[A_Camera]

Szia Csaba,
This sounds crazy and I don't know if the link: http://www.szentkereszty.net works from my home now, but I just tested through the high security firewall of my employer and the link works. Yesterday when I read your post the first time I was logged on the same network through the same firewall...

Hm.... this is weird indeed because normally the opposite is expected, some links should/may not work from my work place but work from home.

I don't know if it helps you solving the issue you have with your ISP, but it is sure strange.

Though one thing is as expected... the link: http://kredenc.onmypc.net/net/uccnc_quickview_plugin/index_en.html is blocked by my company firewall, and that is no surprise for me looking at that web address.

I just thought you wanted to know.

Köszi a programot, este kipróbálom.

[dezsoe]

Szia!

I made some research and found this: http://www.site24x7.com/public/t/result ... 85015.html

I will talk to my provider and ask what's going on. It's not a big surprise that the dynamic DNS is blocked by your company... But my own website MUST work, so I'm a little bit angry. (There was a virus attack some months ago at my provider, maybe some DNS servers are blocking my address. I don't know.)

[mark68]

I cannot get this to work with 1.2116 .

In version 1.2115 I get an unhandeled exception as shown here when clicking on drives.

[santiniuk]

Hi,

I didn't get the error message you are seeing but I did have problems with the plugin.

New version posted here after my bug report that works perfect with latest test release.

http://www.forum.cncdrive.com/viewtopic.php?f=3&t=4597

[mark68]

Hi,

I didn't get the error message you are seeing but I did have problems with the plugin.

New version posted here after my bug report that works perfect with latest test release.

http://www.forum.cncdrive.com/viewtopic.php?f=3&t=4597

Thanks, still got issues browsing with this version too. It would be nice if it could browse network folders or mapped drives?

[dezsoe]

"Documents and settings" is a link only, it was a folder in XP, but time flies... However, I'll check if I can do anything to use hard links and network drives. (I can't remember if I've ever tested with network drives.)