Page 1 of 1
Backlight the part of the path selected in the codeview box.
Posted:
Sun Oct 09, 2016 10:12 amby shad
It's will be great to backlight the part of the path in the Toolpathview corresponding to the selected gcode line in the codeview box. It's works now when program RUN, but will be very useful in the IDLE mode (for example when operator want to select any code line and scroll codeview box).
Thank you!
Re: Backlight the part of the path selected in the codeview
Posted:
Sun Oct 09, 2016 12:30 pmby Derek
I second this. It's very helpful with larger files to get you close to the right line number if you are doing a "run from here"
Re: Backlight the part of the path selected in the codeview
Posted:
Sun Oct 09, 2016 12:51 pmby ger21
+1
Re: Backlight the part of the path selected in the codeview
Posted:
Sun Oct 09, 2016 4:36 pmby Robertspark
+1 too
Re: Backlight the part of the path selected in the codeview
Posted:
Mon Oct 10, 2016 9:17 amby beefy
Oooh yeah baby, count me in for that one too.
I use that with Mach3 when doing a mid cut restart with plasma.
Keith.
Re: Backlight the part of the path selected in the codeview
Posted:
Mon Oct 10, 2016 9:45 pmby cncdrive
OK guys, I'll implement this soon.