Any chance of adding this?
Similar to how 3d printers "auto level" the Z axis.
The feature starts at 1 minute.
https://youtu.be/bhZdbgM6S70
Automatic axis alignment
4 posts
• Page 1 of 1
Automatic axis alignment
by Demusman » Thu Jun 28, 2018 9:34 pm
- Demusman
- Posts: 45
- Joined: Tue Jun 19, 2018 7:38 pm
Re: Automatic axis alignment
by cncdrive » Thu Jun 28, 2018 10:05 pm
You can write a macro like that. It is simple probing and you can rotate the axes via a setpoint with programmed angle using the G68 code.
- cncdrive
- Site Admin
- Posts: 4888
- Joined: Tue Aug 12, 2014 11:17 pm
Re: Automatic axis alignment
by Robertspark » Thu Jun 28, 2018 10:13 pm
There is also the autoleveller plugin too already
UCCNC Macro Manual v1.2113 - https://drive.google.com/drive/folders/ ... sp=sharing
- Robertspark
- Posts: 1892
- Joined: Sat Sep 03, 2016 4:27 pm
Re: Automatic axis alignment
by cncdrive » Thu Jun 28, 2018 10:16 pm
Yes, the autoleveler function is also nice, but it is a bit different than what is on the video.
The autoleveler adjusts the XY plane with multiple probing, so the surface can be irregular.
The feature asked for is a simple G68 rotation based on the probed values.
I know you know it Rob, I'm just explaining to Demusman.
The autoleveler adjusts the XY plane with multiple probing, so the surface can be irregular.
The feature asked for is a simple G68 rotation based on the probed values.
I know you know it Rob, I'm just explaining to Demusman.
- cncdrive
- Site Admin
- Posts: 4888
- Joined: Tue Aug 12, 2014 11:17 pm
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests