UCCNC macro for saving images.

[cstb111]

Hi New here and new to UCCNC.

So I have no idea if it is possible so if people know if it is or has any advice on making it work that would be much appreciated.

I am trying to take an image of each layer and save it to a directory. I need to do this in software, not with a switch like I've seen some people do.

I will be using UCCNC in a 3D printing set-up (Don't ask why work decision) I will be having the gantry move to a location for each layer and then I will hopefully trigger the macro to activate the camera.

Getting out of the way is easy, but I've struggled with controlling the macro for the camera.

Any advice on achieving this? or if it's even possible?