Help with macro
Posted: Fri Apr 05, 2019 11:56 pmHelp with macro
In Mach3, there is an option Goto SafeZ when Stop button is hit.
Is something like this possible in Uccnc?
Can anyone help me in creating a macro (or macroloop) that will send a Z axis to -10mm (machine coordinates) after pressing the CYCLE STOP button.
In Mach3, there is an option Goto SafeZ when Stop button is hit.
Is something like this possible in Uccnc?
Can anyone help me in creating a macro (or macroloop) that will send a Z axis to -10mm (machine coordinates) after pressing the CYCLE STOP button.