CNC Router Cutting Problems

Post anything you want to discuss with others about the software.

CNC Router Cutting Problems

Postby hzemall » Sun Apr 14, 2019 5:32 pm

I am a total newb when it comes to all of this so bear with me.

We have a chinese CNC Router that we swapped out the NC controller to a UC300ETH with the C76 and c77 boards from CNC4PC along with UCCNC software.

I designed this panel on Fusion 360 and when it cut the panel it cut off one of the corners of the panel. The cut off corner doesn't show up on the Fusion simulation or on the UCCNC screen when it's actually cutting.

Here is the public link to the file https://a360.co/2v1HFZk

Not sure how to attach the gcode file

Any thoughts on this?
Attachments
Problem.jpg
Problem 1.jpg
Problem 2.jpg
hzemall
 
Posts: 8
Joined: Sun Apr 14, 2019 3:52 pm

Re: CNC Router Cutting Problems

Postby Dan911 » Sun Apr 14, 2019 7:01 pm

Post the Gcode file....just change the file extension to .txt
Also posting the UCCNC version will be necessary to get help.
Dan911
 
Posts: 590
Joined: Mon Oct 31, 2016 1:22 am
Location: USA

Re: CNC Router Cutting Problems

Postby hzemall » Sun Apr 14, 2019 7:07 pm

Dan911 wrote:Post the Gcode file....just change the file extension to .txt
Also posting the UCCNC version will be necessary to get help.


Thanks, will grab it tomorrow at the shop
hzemall
 
Posts: 8
Joined: Sun Apr 14, 2019 3:52 pm

Re: CNC Router Cutting Problems

Postby ger21 » Sun Apr 14, 2019 7:11 pm

It's probably an issue with your CV settings.
Gerry
UCCNC 2017 Screenset - http://www.thecncwoodworker.com/2017.html
ger21
 
Posts: 1533
Joined: Sat Sep 03, 2016 2:17 am

Re: CNC Router Cutting Problems

Postby hzemall » Tue Apr 16, 2019 12:03 am

The UCCNC Gcode file is the gcode from UCCNC, the untitled file is the screen show of the settings from UCCNC and below is the gcode from Fusion 360

(1001)
(T2 D=0.125 CR=0. - ZMIN=-0.125 - flat end mill)
G90
G0 G53 Z0.

(2D Contour10)
T2 M6 (flat end mill D=0.125 1/8" Flat Endmill (TFC Acrylic))
S12000 M3
G64
G54
M8
G43 H2
G0 X11.4573 Y1.4412
Z0.6
Z0.2
G1 Z-0.0394 F20
Y1.503 F100
X6.1423
Y1.3795
X11.4573
Y1.4412
Z-0.0787 F20
Y1.503 F100
X6.1423
Y1.3795
X11.4573
Y1.4412
Z-0.1019 F20
Y1.503 F100
X6.1423
Y1.3795
X11.4573
Y1.4412
Z-0.125 F20
Y1.503 F100
X6.1423
Y1.3795
X11.4573
Y1.4412
G0 Z0.2
X6.204 Y1.0045
G1 Z-0.0394 F20
X6.1423 F100
Y0.881
X11.4573
Y1.0045
X6.204
Z-0.0787 F20
X6.1423 F100
Y0.881
X11.4573
Y1.0045
X6.204
Z-0.1019 F20
X6.1423 F100
Y0.881
X11.4573
Y1.0045
X6.204
Z-0.125 F20
X6.1423 F100
Y0.881
X11.4573
Y1.0045
X6.204
G0 Z0.2
X11.2722 Y0.3841
G1 Z-0.0394 F20
G3 X11.4465 Y0.509 I-0.0024 J0.1875 F100
G1 X6.1423 Y0.506
Y0.3825
X11.2698 Y0.3841
X11.2722
Z-0.0787 F20
G3 X11.4465 Y0.509 I-0.0024 J0.1875 F100
G1 X6.1423 Y0.506
Y0.3825
X11.2698 Y0.3841
X11.2722
Z-0.1019 F20
G3 X11.4465 Y0.509 I-0.0024 J0.1875 F100
G1 X6.1423 Y0.506
Y0.3825
X11.2698 Y0.3841
X11.2722
Z-0.125 F20
G3 X11.4465 Y0.509 I-0.0024 J0.1875 F100
G1 X6.1423 Y0.506
Y0.3825
X11.2698 Y0.3841
X11.2722
G0 Z0.2
X11.4229 Y-0.0576
G1 Z-0.0394 F20
X11.3208 Y-0.0582 F100
X10.8042 Y-0.0599
X10.2876 Y-0.0611
X9.771 Y-0.0619
X9.2544 Y-0.0623
X8.7378 Y-0.0621
X8.4684 Y-0.0622
X5.9199 Y-0.0625
X3.5635
X3.1896
X2.6351 Y-0.0627
X2.0806 Y-0.0624
X1.526 Y-0.0616
X0.9715 Y-0.0604
X0.417 Y-0.0588
X0.3998 Y-0.0584
X0.3827 Y-0.0573
X0.3656 Y-0.0557
X0.3485 Y-0.0534
X0.3316 Y-0.0506
X0.3148 Y-0.0471
X0.2981 Y-0.0431
X0.2816 Y-0.0384
X0.2652 Y-0.0332
X0.249 Y-0.0274
X0.2331 Y-0.021
X0.2174 Y-0.0141
X0.2019 Y-0.0066
X0.1868 Y0.0014
X0.1719 Y0.01
X0.1573 Y0.0191
X0.1431 Y0.0287
X0.1292 Y0.0388
X0.1157 Y0.0494
X0.1026 Y0.0605
X0.0899 Y0.072
X0.0776 Y0.0839
X0.0657 Y0.0963
X0.0543 Y0.1092
X0.0433 Y0.1224
X0.0328 Y0.136
X0.0228 Y0.1499
X0.0133 Y0.1642
X0.0044 Y0.1788
X-0.0041 Y0.1938
X-0.012 Y0.209
X-0.0194 Y0.2245
X-0.0262 Y0.2403
X-0.0324 Y0.2562
X-0.0381 Y0.2724
X-0.0432 Y0.2888
X-0.0477 Y0.3054
X-0.0516 Y0.3221
X-0.055 Y0.3389
X-0.0577 Y0.3558
X-0.0598 Y0.3729
X-0.0613 Y0.39
X-0.0622 Y0.4071
X-0.0625 Y0.4243
Y1.7836
G2 X0.364 Y2.2628 I0.4825 J0.
G1 X0.3643 Y2.2629
G2 X2.0546 Y2.3893 I2.5569 J-22.8102
G1 X2.2301 Y2.3966
X2.4056 Y2.4033
X2.5812 Y2.4095
X2.7567 Y2.415
X2.9323 Y2.42
X3.1079 Y2.4244
X3.2836 Y2.4282
X3.4592 Y2.4314
X3.6349 Y2.4341
X3.8105 Y2.4361
X3.9862 Y2.4376
X4.2536 Y2.4406
X4.521 Y2.443
X4.7885 Y2.4448
X5.0559 Y2.4459
X5.3233 Y2.4464
X5.5206 Y2.4466
X5.7195
X5.9198 Y2.4465
X6.12 Y2.4467
X6.3189 Y2.4466
X6.5162 Y2.4464
X6.7466
X6.977 Y2.4458
X7.2074 Y2.4447
X7.4378 Y2.4431
X7.6682 Y2.4409
X7.8986 Y2.4382
X8.129 Y2.4349
X8.3594 Y2.4311
X8.5897 Y2.4268
X8.8201 Y2.4219
X9.0504 Y2.4165
X9.2808 Y2.4106
G2 X10.8921 Y2.3224 I-1.0906 J-34.7141
X11.4758 Y2.2636 I-2.017 J-22.9201
G1 X11.4927 Y2.2613
X11.5096 Y2.2584
X11.5264 Y2.2549
X11.543 Y2.2508
X11.5595 Y2.2462
X11.5758 Y2.2409
X11.5919 Y2.2351
X11.6077 Y2.2287
X11.6234 Y2.2218
X11.6388 Y2.2143
X11.6539 Y2.2062
X11.6687 Y2.1976
X11.6832 Y2.1886
X11.6974 Y2.179
X11.7112 Y2.1689
X11.7247 Y2.1583
X11.7377 Y2.1472
X11.7504 Y2.1357
X11.7627 Y2.1238
X11.7745 Y2.1114
X11.7859 Y2.0986
X11.7968 Y2.0854
X11.8072 Y2.0719
X11.8172 Y2.0579
X11.8266 Y2.0437
X11.8356 Y2.0291
X11.844 Y2.0142
X11.8519 Y1.999
X11.8592 Y1.9835
X11.866 Y1.9678
X11.8722 Y1.9519
X11.8779 Y1.9357
X11.883 Y1.9194
X11.8875 Y1.9028
X11.8914 Y1.8862
X11.8947 Y1.8694
X11.8974 Y1.8525
X11.8995 Y1.8355
X11.9011 Y1.8184
X11.902 Y1.8014
X11.9023 Y1.7842
Y0.4249
G2 X11.4229 Y-0.0576 I-0.4825 J0.
G1 Z-0.0787 F20
X10.8859 Y-0.0596 F100
X10.3489 Y-0.061
X9.8118 Y-0.0619
X9.2748 Y-0.0623
X8.7378 Y-0.0621
X8.4684 Y-0.0622
X5.9199 Y-0.0625
X3.5635
X3.1896
X2.6351 Y-0.0627
X2.0806 Y-0.0624
X1.526 Y-0.0616
X0.9715 Y-0.0604
X0.417 Y-0.0588
X0.3998 Y-0.0584
X0.3827 Y-0.0573
X0.3656 Y-0.0557
X0.3485 Y-0.0534
X0.3316 Y-0.0506
X0.3148 Y-0.0471
X0.2981 Y-0.0431
X0.2816 Y-0.0384
X0.2652 Y-0.0332
X0.249 Y-0.0274
X0.2331 Y-0.021
X0.2174 Y-0.0141
X0.2019 Y-0.0066
X0.1868 Y0.0014
X0.1719 Y0.01
X0.1573 Y0.0191
X0.1431 Y0.0287
X0.1292 Y0.0388
X0.1157 Y0.0494
X0.1026 Y0.0605
X0.0899 Y0.072
X0.0776 Y0.0839
X0.0657 Y0.0963
X0.0543 Y0.1092
X0.0433 Y0.1224
X0.0328 Y0.136
X0.0228 Y0.1499
X0.0133 Y0.1642
X0.0044 Y0.1788
X-0.0041 Y0.1938
X-0.012 Y0.209
X-0.0194 Y0.2245
X-0.0262 Y0.2403
X-0.0324 Y0.2562
X-0.0381 Y0.2724
X-0.0432 Y0.2888
X-0.0477 Y0.3054
X-0.0516 Y0.3221
X-0.055 Y0.3389
X-0.0577 Y0.3558
X-0.0598 Y0.3729
X-0.0613 Y0.39
X-0.0622 Y0.4071
X-0.0625 Y0.4243
Y1.7836
G2 X0.364 Y2.2628 I0.4825 J0.
G1 X0.3643 Y2.2629
G2 X2.0546 Y2.3893 I2.5569 J-22.8102
G1 X2.2301 Y2.3966
X2.4056 Y2.4033
X2.5812 Y2.4095
X2.7567 Y2.415
X2.9323 Y2.42
X3.1079 Y2.4244
X3.2836 Y2.4282
X3.4592 Y2.4314
X3.6349 Y2.4341
X3.8105 Y2.4361
X3.9862 Y2.4376
X4.2536 Y2.4406
X4.521 Y2.443
X4.7885 Y2.4448
X5.0559 Y2.4459
X5.3233 Y2.4464
X5.5206 Y2.4466
X5.7195
X5.9198 Y2.4465
X6.12 Y2.4467
X6.3189 Y2.4466
X6.5162 Y2.4464
X6.7466
X6.977 Y2.4458
X7.2074 Y2.4447
X7.4378 Y2.4431
X7.6682 Y2.4409
X7.8986 Y2.4382
X8.129 Y2.4349
X8.3594 Y2.4311
X8.5897 Y2.4268
X8.8201 Y2.4219
X9.0504 Y2.4165
X9.2808 Y2.4106
G2 X10.8921 Y2.3224 I-1.0906 J-34.7141
X11.4758 Y2.2636 I-2.017 J-22.9201
G1 X11.4927 Y2.2613
X11.5096 Y2.2584
X11.5264 Y2.2549
X11.543 Y2.2508
X11.5595 Y2.2462
X11.5758 Y2.2409
X11.5919 Y2.2351
X11.6077 Y2.2287
X11.6234 Y2.2218
X11.6388 Y2.2143
X11.6539 Y2.2062
X11.6687 Y2.1976
X11.6832 Y2.1886
X11.6974 Y2.179
X11.7112 Y2.1689
X11.7247 Y2.1583
X11.7377 Y2.1472
X11.7504 Y2.1357
X11.7627 Y2.1238
X11.7745 Y2.1114
X11.7859 Y2.0986
X11.7968 Y2.0854
X11.8072 Y2.0719
X11.8172 Y2.0579
X11.8266 Y2.0437
X11.8356 Y2.0291
X11.844 Y2.0142
X11.8519 Y1.999
X11.8592 Y1.9835
X11.866 Y1.9678
X11.8722 Y1.9519
X11.8779 Y1.9357
X11.883 Y1.9194
X11.8875 Y1.9028
X11.8914 Y1.8862
X11.8947 Y1.8694
X11.8974 Y1.8525
X11.8995 Y1.8355
X11.9011 Y1.8184
X11.902 Y1.8014
X11.9023 Y1.7842
Y0.4249
G2 X11.4229 Y-0.0576 I-0.4825 J0.
G1 Z-0.1019 F20
X10.8859 Y-0.0596 F100
X10.3489 Y-0.061
X9.8118 Y-0.0619
X9.2748 Y-0.0623
X8.7378 Y-0.0621
X8.4684 Y-0.0622
X5.9199 Y-0.0625
X3.5635
X3.1896
X2.6351 Y-0.0627
X2.0806 Y-0.0624
X1.526 Y-0.0616
X0.9715 Y-0.0604
X0.417 Y-0.0588
X0.3998 Y-0.0584
X0.3827 Y-0.0573
X0.3656 Y-0.0557
X0.3485 Y-0.0534
X0.3316 Y-0.0506
X0.3148 Y-0.0471
X0.2981 Y-0.0431
X0.2816 Y-0.0384
X0.2652 Y-0.0332
X0.249 Y-0.0274
X0.2331 Y-0.021
X0.2174 Y-0.0141
X0.2019 Y-0.0066
X0.1868 Y0.0014
X0.1719 Y0.01
X0.1573 Y0.0191
X0.1431 Y0.0287
X0.1292 Y0.0388
X0.1157 Y0.0494
X0.1026 Y0.0605
X0.0899 Y0.072
X0.0776 Y0.0839
X0.0657 Y0.0963
X0.0543 Y0.1092
X0.0433 Y0.1224
X0.0328 Y0.136
X0.0228 Y0.1499
X0.0133 Y0.1642
X0.0044 Y0.1788
X-0.0041 Y0.1938
X-0.012 Y0.209
X-0.0194 Y0.2245
X-0.0262 Y0.2403
X-0.0324 Y0.2562
X-0.0381 Y0.2724
X-0.0432 Y0.2888
X-0.0477 Y0.3054
X-0.0516 Y0.3221
X-0.055 Y0.3389
X-0.0577 Y0.3558
X-0.0598 Y0.3729
X-0.0613 Y0.39
X-0.0622 Y0.4071
X-0.0625 Y0.4243
Y1.7836
G2 X0.364 Y2.2628 I0.4825 J0.
G1 X0.3643 Y2.2629
G2 X2.0546 Y2.3893 I2.5569 J-22.8102
G1 X2.2301 Y2.3966
X2.4056 Y2.4033
X2.5812 Y2.4095
X2.7567 Y2.415
X2.9323 Y2.42
X3.1079 Y2.4244
X3.2836 Y2.4282
X3.4592 Y2.4314
X3.6349 Y2.4341
X3.8105 Y2.4361
X3.9862 Y2.4376
X4.2536 Y2.4406
X4.521 Y2.443
X4.7885 Y2.4448
X5.0559 Y2.4459
X5.3233 Y2.4464
X5.5206 Y2.4466
X5.7195
X5.9198 Y2.4465
X6.12 Y2.4467
X6.3189 Y2.4466
X6.5162 Y2.4464
X6.7466
X6.977 Y2.4458
X7.2074 Y2.4447
X7.4378 Y2.4431
X7.6682 Y2.4409
X7.8986 Y2.4382
X8.129 Y2.4349
X8.3594 Y2.4311
X8.5897 Y2.4268
X8.8201 Y2.4219
X9.0504 Y2.4165
X9.2808 Y2.4106
G2 X10.8921 Y2.3224 I-1.0906 J-34.7141
X11.4758 Y2.2636 I-2.017 J-22.9201
G1 X11.4927 Y2.2613
X11.5096 Y2.2584
X11.5264 Y2.2549
X11.543 Y2.2508
X11.5595 Y2.2462
X11.5758 Y2.2409
X11.5919 Y2.2351
X11.6077 Y2.2287
X11.6234 Y2.2218
X11.6388 Y2.2143
X11.6539 Y2.2062
X11.6687 Y2.1976
X11.6832 Y2.1886
X11.6974 Y2.179
X11.7112 Y2.1689
X11.7247 Y2.1583
X11.7377 Y2.1472
X11.7504 Y2.1357
X11.7627 Y2.1238
X11.7745 Y2.1114
X11.7859 Y2.0986
X11.7968 Y2.0854
X11.8072 Y2.0719
X11.8172 Y2.0579
X11.8266 Y2.0437
X11.8356 Y2.0291
X11.844 Y2.0142
X11.8519 Y1.999
X11.8592 Y1.9835
X11.866 Y1.9678
X11.8722 Y1.9519
X11.8779 Y1.9357
X11.883 Y1.9194
X11.8875 Y1.9028
X11.8914 Y1.8862
X11.8947 Y1.8694
X11.8974 Y1.8525
X11.8995 Y1.8355
X11.9011 Y1.8184
X11.902 Y1.8014
X11.9023 Y1.7842
Y0.4249
G2 X11.4229 Y-0.0576 I-0.4825 J0.
G1 Z-0.125 F20
X10.8859 Y-0.0596 F100
X10.3489 Y-0.061
X9.8118 Y-0.0619
X9.2748 Y-0.0623
X8.7378 Y-0.0621
X8.4684 Y-0.0622
X5.9199 Y-0.0625
X3.5635
X3.1896
X2.6351 Y-0.0627
X2.0806 Y-0.0624
X1.526 Y-0.0616
X0.9715 Y-0.0604
X0.417 Y-0.0588
X0.3998 Y-0.0584
X0.3827 Y-0.0573
X0.3656 Y-0.0557
X0.3485 Y-0.0534
X0.3316 Y-0.0506
X0.3148 Y-0.0471
X0.2981 Y-0.0431
X0.2816 Y-0.0384
X0.2652 Y-0.0332
X0.249 Y-0.0274
X0.2331 Y-0.021
X0.2174 Y-0.0141
X0.2019 Y-0.0066
X0.1868 Y0.0014
X0.1719 Y0.01
X0.1573 Y0.0191
X0.1431 Y0.0287
X0.1292 Y0.0388
X0.1157 Y0.0494
X0.1026 Y0.0605
X0.0899 Y0.072
X0.0776 Y0.0839
X0.0657 Y0.0963
X0.0543 Y0.1092
X0.0433 Y0.1224
X0.0328 Y0.136
X0.0228 Y0.1499
X0.0133 Y0.1642
X0.0044 Y0.1788
X-0.0041 Y0.1938
X-0.012 Y0.209
X-0.0194 Y0.2245
X-0.0262 Y0.2403
X-0.0324 Y0.2562
X-0.0381 Y0.2724
X-0.0432 Y0.2888
X-0.0477 Y0.3054
X-0.0516 Y0.3221
X-0.055 Y0.3389
X-0.0577 Y0.3558
X-0.0598 Y0.3729
X-0.0613 Y0.39
X-0.0622 Y0.4071
X-0.0625 Y0.4243
Y1.7836
G2 X0.364 Y2.2628 I0.4825 J0.
G1 X0.3643 Y2.2629
G2 X2.0546 Y2.3893 I2.5569 J-22.8102
G1 X2.2301 Y2.3966
X2.4056 Y2.4033
X2.5812 Y2.4095
X2.7567 Y2.415
X2.9323 Y2.42
X3.1079 Y2.4244
X3.2836 Y2.4282
X3.4592 Y2.4314
X3.6349 Y2.4341
X3.8105 Y2.4361
X3.9862 Y2.4376
X4.2536 Y2.4406
X4.521 Y2.443
X4.7885 Y2.4448
X5.0559 Y2.4459
X5.3233 Y2.4464
X5.5206 Y2.4466
X5.7195
X5.9198 Y2.4465
X6.12 Y2.4467
X6.3189 Y2.4466
X6.5162 Y2.4464
X6.7466
X6.977 Y2.4458
X7.2074 Y2.4447
X7.4378 Y2.4431
X7.6682 Y2.4409
X7.8986 Y2.4382
X8.129 Y2.4349
X8.3594 Y2.4311
X8.5897 Y2.4268
X8.8201 Y2.4219
X9.0504 Y2.4165
X9.2808 Y2.4106
G2 X10.8921 Y2.3224 I-1.0906 J-34.7141
X11.4758 Y2.2636 I-2.017 J-22.9201
G1 X11.4927 Y2.2613
X11.5096 Y2.2584
X11.5264 Y2.2549
X11.543 Y2.2508
X11.5595 Y2.2462
X11.5758 Y2.2409
X11.5919 Y2.2351
X11.6077 Y2.2287
X11.6234 Y2.2218
X11.6388 Y2.2143
X11.6539 Y2.2062
X11.6687 Y2.1976
X11.6832 Y2.1886
X11.6974 Y2.179
X11.7112 Y2.1689
X11.7247 Y2.1583
X11.7377 Y2.1472
X11.7504 Y2.1357
X11.7627 Y2.1238
X11.7745 Y2.1114
X11.7859 Y2.0986
X11.7968 Y2.0854
X11.8072 Y2.0719
X11.8172 Y2.0579
X11.8266 Y2.0437
X11.8356 Y2.0291
X11.844 Y2.0142
X11.8519 Y1.999
X11.8592 Y1.9835
X11.866 Y1.9678
X11.8722 Y1.9519
X11.8779 Y1.9357
X11.883 Y1.9194
X11.8875 Y1.9028
X11.8914 Y1.8862
X11.8947 Y1.8694
X11.8974 Y1.8525
X11.8995 Y1.8355
X11.9011 Y1.8184
X11.902 Y1.8014
X11.9023 Y1.7842
Y0.4249
G2 X11.4229 Y-0.0576 I-0.4825 J0.
G0 Z0.2
X6.2677 Y2.0017
G1 Z-0.0394 F20
X6.1423 Y2.0016 F100
Y1.878
X10.8577
G3 X8.9086 Y1.9742 I-2.5634 J-32.1434
G1 X8.6817 Y1.9794
X8.4547 Y1.9841
X8.2278 Y1.9882
X8.0009 Y1.9917
X7.7739 Y1.9946
X7.547 Y1.9969
X7.32 Y1.9987
X7.093 Y1.9999
X6.8661 Y2.0005
X6.6391
X6.4541 Y2.0015
X6.2677 Y2.0017
Z-0.0787 F20
X6.1423 Y2.0016 F100
Y1.878
X10.8577
G3 X8.9086 Y1.9742 I-2.5634 J-32.1434
G1 X8.6817 Y1.9794
X8.4547 Y1.9841
X8.2278 Y1.9882
X8.0009 Y1.9917
X7.7739 Y1.9946
X7.547 Y1.9969
X7.32 Y1.9987
X7.093 Y1.9999
X6.8661 Y2.0005
X6.6391
X6.4541 Y2.0015
X6.2677 Y2.0017
Z-0.1019 F20
X6.1423 Y2.0016 F100
Y1.878
X10.8577
G3 X8.9086 Y1.9742 I-2.5634 J-32.1434
G1 X8.6817 Y1.9794
X8.4547 Y1.9841
X8.2278 Y1.9882
X8.0009 Y1.9917
X7.7739 Y1.9946
X7.547 Y1.9969
X7.32 Y1.9987
X7.093 Y1.9999
X6.8661 Y2.0005
X6.6391
X6.4541 Y2.0015
X6.2677 Y2.0017
Z-0.125 F20
X6.1423 Y2.0016 F100
Y1.878
X10.8577
G3 X8.9086 Y1.9742 I-2.5634 J-32.1434
G1 X8.6817 Y1.9794
X8.4547 Y1.9841
X8.2278 Y1.9882
X8.0009 Y1.9917
X7.7739 Y1.9946
X7.547 Y1.9969
X7.32 Y1.9987
X7.093 Y1.9999
X6.8661 Y2.0005
X6.6391
X6.4541 Y2.0015
X6.2677 Y2.0017
G0 Z0.2
X5.572 Y2.0016
G1 Z-0.0394 F20
X5.3171 Y2.0017 F100
X5.0621 Y2.0013
X4.8072 Y2.0002
X4.5523 Y1.9986
X4.2973 Y1.9965
X4.0424 Y1.9937
X3.7875 Y1.9904
X3.5326 Y1.9865
X3.2777 Y1.982
X3.0228 Y1.977
X2.7679 Y1.9713
X2.6148 Y1.9667
X2.4618 Y1.9614
X2.3087 Y1.9556
X2.1557 Y1.9492
X2.0027 Y1.9422
X1.8497 Y1.9346
X1.6968 Y1.9264
X1.5438 Y1.9176
X1.391 Y1.9082
X1.2381 Y1.8982
X1.0962 Y1.8868
X0.9893 Y1.878
X5.6973
Y2.0016
X5.572
Z-0.0787 F20
X5.3171 Y2.0017 F100
X5.0621 Y2.0013
X4.8072 Y2.0002
X4.5523 Y1.9986
X4.2973 Y1.9965
X4.0424 Y1.9937
X3.7875 Y1.9904
X3.5326 Y1.9865
X3.2777 Y1.982
X3.0228 Y1.977
X2.7679 Y1.9713
X2.6148 Y1.9667
X2.4618 Y1.9614
X2.3087 Y1.9556
X2.1557 Y1.9492
X2.0027 Y1.9422
X1.8497 Y1.9346
X1.6968 Y1.9264
X1.5438 Y1.9176
X1.391 Y1.9082
X1.2381 Y1.8982
X1.0962 Y1.8868
X0.9893 Y1.878
X5.6973
Y2.0016
X5.572
Z-0.1019 F20
X5.3171 Y2.0017 F100
X5.0621 Y2.0013
X4.8072 Y2.0002
X4.5523 Y1.9986
X4.2973 Y1.9965
X4.0424 Y1.9937
X3.7875 Y1.9904
X3.5326 Y1.9865
X3.2777 Y1.982
X3.0228 Y1.977
X2.7679 Y1.9713
X2.6148 Y1.9667
X2.4618 Y1.9614
X2.3087 Y1.9556
X2.1557 Y1.9492
X2.0027 Y1.9422
X1.8497 Y1.9346
X1.6968 Y1.9264
X1.5438 Y1.9176
X1.391 Y1.9082
X1.2381 Y1.8982
X1.0962 Y1.8868
X0.9893 Y1.878
X5.6973
Y2.0016
X5.572
Z-0.125 F20
X5.3171 Y2.0017 F100
X5.0621 Y2.0013
X4.8072 Y2.0002
X4.5523 Y1.9986
X4.2973 Y1.9965
X4.0424 Y1.9937
X3.7875 Y1.9904
X3.5326 Y1.9865
X3.2777 Y1.982
X3.0228 Y1.977
X2.7679 Y1.9713
X2.6148 Y1.9667
X2.4618 Y1.9614
X2.3087 Y1.9556
X2.1557 Y1.9492
X2.0027 Y1.9422
X1.8497 Y1.9346
X1.6968 Y1.9264
X1.5438 Y1.9176
X1.391 Y1.9082
X1.2381 Y1.8982
X1.0962 Y1.8868
X0.9893 Y1.878
X5.6973
Y2.0016
X5.572
G0 Z0.2
X0.4442 Y1.503
G1 Z-0.0394 F20
X0.3824 F100
X0.3825 Y1.3795
X5.6973
Y1.503
X0.4442
Z-0.0787 F20
X0.3824 F100
X0.3825 Y1.3795
X5.6973
Y1.503
X0.4442
Z-0.1019 F20
X0.3824 F100
X0.3825 Y1.3795
X5.6973
Y1.503
X0.4442
Z-0.125 F20
X0.3824 F100
X0.3825 Y1.3795
X5.6973
Y1.503
X0.4442
G0 Z0.2
X5.6973 Y0.9427
G1 Z-0.0394 F20
Y1.0045 F100
X0.3825
Y0.881
X5.6973
Y0.9427
Z-0.0787 F20
Y1.0045 F100
X0.3825
Y0.881
X5.6973
Y0.9427
Z-0.1019 F20
Y1.0045 F100
X0.3825
Y0.881
X5.6973
Y0.9427
Z-0.125 F20
Y1.0045 F100
X0.3825
Y0.881
X5.6973
Y0.9427
G0 Z0.2
X0.5676 Y0.3834
G1 Z-0.0394 F20
X0.57 F100
X5.6973 Y0.3825
Y0.506
X0.3932 Y0.5084
G3 X0.5676 Y0.3834 I0.1768 J0.0625
G1 Z-0.0787 F20
X0.57 F100
X5.6973 Y0.3825
Y0.506
X0.3932 Y0.5084
G3 X0.5676 Y0.3834 I0.1768 J0.0625
G1 Z-0.1019 F20
X0.57 F100
X5.6973 Y0.3825
Y0.506
X0.3932 Y0.5084
G3 X0.5676 Y0.3834 I0.1768 J0.0625
G1 Z-0.125 F20
X0.57 F100
X5.6973 Y0.3825
Y0.506
X0.3932 Y0.5084
G3 X0.5676 Y0.3834 I0.1768 J0.0625
G0 Z0.6
M9
M5
G53 Z0.
M30
Attachments
UCCNC G-Code.txt
(15.04 KiB) Downloaded 26 times
hzemall
 
Posts: 8
Joined: Sun Apr 14, 2019 3:52 pm

Re: CNC Router Cutting Problems

Postby hzemall » Tue Apr 16, 2019 12:06 am

Here are images of the post process from fusion showing the settings.
Attachments
20190415_155926.jpg
20190415_155921.jpg
20190415_155912.jpg
hzemall
 
Posts: 8
Joined: Sun Apr 14, 2019 3:52 pm

Re: CNC Router Cutting Problems

Postby ger21 » Tue Apr 16, 2019 12:27 am

What are your CV settings in UCCNC?
Gerry
UCCNC 2017 Screenset - http://www.thecncwoodworker.com/2017.html
ger21
 
Posts: 1533
Joined: Sat Sep 03, 2016 2:17 am

Re: CNC Router Cutting Problems

Postby hzemall » Sat Apr 20, 2019 4:39 am

ger21 wrote:What are your CV settings in UCCNC?


CV Settings?
hzemall
 
Posts: 8
Joined: Sun Apr 14, 2019 3:52 pm

Re: CNC Router Cutting Problems

Postby ger21 » Sat Apr 20, 2019 9:57 am

hzemall wrote:
ger21 wrote:What are your CV settings in UCCNC?


CV Settings?


CV.JPG
Gerry
UCCNC 2017 Screenset - http://www.thecncwoodworker.com/2017.html
ger21
 
Posts: 1533
Joined: Sat Sep 03, 2016 2:17 am

Re: CNC Router Cutting Problems

Postby hzemall » Sun Apr 21, 2019 12:41 am

Here are the settings in UCCNC as well as the Post Processing settings in Fusion 360

Thanks
Attachments
uccnc4.jpg
uccnc3.jpg
uccnc2.jpg
uccnc1.jpg
hzemall
 
Posts: 8
Joined: Sun Apr 14, 2019 3:52 pm

Next

Return to General discussion about the UCCNC software

Who is online

Users browsing this forum: No registered users and 2 guests

cron