German language

If you have a question about the software please ask it here.

German language

Postby digohm » Wed Jan 09, 2019 5:58 pm

Hi everyone,

I am retrofitting an old cnc machine with UC300ETH and UB1 breakout board. The user of the machine does not speak English. Would it be possible to change the language of UCCNC to German?
I have seen a German version for the Stepcraft machines.

Kind regards,
Tom
digohm
 
Posts: 4
Joined: Wed Jan 09, 2019 5:52 pm

Re: German language

Postby dezsoe » Wed Jan 09, 2019 7:17 pm

Some system messages are fixed English. All other controls and labels are png files, anyone can modify it.
dezsoe
 
Posts: 728
Joined: Sun Mar 12, 2017 4:41 pm
Location: Csörög, Hungary

Re: German language

Postby cncdrive » Wed Jan 09, 2019 7:18 pm

Most system messages are defined in the profile file, you can change them to German if you want.
And the screen control texts are on picture images, in the UCCNC/Flashscreen folder, you could re-draw them to make them German.
cncdrive
Site Admin
 
Posts: 2641
Joined: Tue Aug 12, 2014 11:17 pm

Re: German language

Postby digohm » Wed Jan 09, 2019 8:48 pm

Thank you very much for your fast reply! That sound like an easy solution :)
digohm
 
Posts: 4
Joined: Wed Jan 09, 2019 5:52 pm


Return to Ask a question from support here

Who is online

Users browsing this forum: laki and 9 guests