New UCCNC screenset

If you created a new screenset and want to share it with others then please post it here. You can talk about screens here.

New UCCNC screenset

Postby kig23 » Thu Sep 06, 2018 4:38 pm

Hi,
i had an old project for Mach3 that i rebuild for UCCNC. The screenset support all UCCNC motion controllers. I have to make only the Diagnostic tab (half built) and screenset will be ready to release, if anyone is interested. Soon i'll give more details. Here is a screenshot of the Run tab.
Attachments
screen.png
kig23
 
Posts: 104
Joined: Sat Mar 31, 2018 6:58 am
Location: Italy

Re: New UCCNC screenset

Postby robertk925 » Fri Sep 07, 2018 4:35 am

Nice! Looking forward to its release.
robertk925
 
Posts: 9
Joined: Tue Sep 19, 2017 7:49 pm

Re: New UCCNC screenset

Postby kig23 » Sat Sep 08, 2018 9:57 am

The screenset is optimised for resolution 1366x768. Here are more details of the screenset.
Attachments
general.png
jog.png
tools.png
kig23
 
Posts: 104
Joined: Sat Mar 31, 2018 6:58 am
Location: Italy

Re: New UCCNC screenset

Postby ger21 » Sat Sep 08, 2018 10:46 am

Nice work. You must have a lot of time in that.
Gerry
UCCNC 2017 Screenset - http://www.thecncwoodworker.com/2017.html
ger21
 
Posts: 1111
Joined: Sat Sep 03, 2016 2:17 am

Re: New UCCNC screenset

Postby kig23 » Sat Sep 08, 2018 11:27 am

Thanks Gerry. I've worked two months on this project, but the design was made. Like a wrote the project was for Mach3, but i didn't make it because of the flash support and then migrating to UCCNC, i've decided to rebuild it for UCCNC. Thanks again for your appreciation.
kig23
 
Posts: 104
Joined: Sat Mar 31, 2018 6:58 am
Location: Italy

Re: New UCCNC screenset

Postby cncdrive » Sat Sep 08, 2018 8:58 pm

Nice work. I hope you will publish it so others can benefit from your hard work. :)
cncdrive
Site Admin
 
Posts: 2187
Joined: Tue Aug 12, 2014 11:17 pm

Re: New UCCNC screenset

Postby kig23 » Sun Sep 09, 2018 9:37 am

Thanks Balazs.
kig23
 
Posts: 104
Joined: Sat Mar 31, 2018 6:58 am
Location: Italy

Re: New UCCNC screenset

Postby ack1 » Fri Sep 21, 2018 12:43 pm

Very impressive, well done
ack1
 
Posts: 4
Joined: Sun Oct 16, 2016 1:29 pm


Return to Custom Screensets

Who is online

Users browsing this forum: No registered users and 0 guests