Toolpath display error.

If you think you've found a bug post it here.

Re: Toolpath display error.

Postby Vmax549 » Sat Aug 11, 2018 9:42 pm

OK I worked it out how to plot a Spiral Helix.
Attachments
SH2.jpg
SH1.jpg
Vmax549
 
Posts: 1313
Joined: Sun Nov 22, 2015 3:25 am
Location: USA

Re: Toolpath display error.

Postby cncdrive » Sat Aug 11, 2018 10:08 pm

IVe made some code changing in the toolpath view, so now the changing radius not real arcs are also displayed properly.
I'm attaching an image with Gerry's errorous arc and the spiral is displayed. It will be like this in the next UCCNC release.
Attachments
changingradiusarccorrection.png
cncdrive
Site Admin
 
Posts: 2264
Joined: Tue Aug 12, 2014 11:17 pm

Re: Toolpath display error.

Postby ger21 » Sat Aug 11, 2018 11:57 pm

Very cool. Thanks.
Gerry
UCCNC 2017 Screenset - http://www.thecncwoodworker.com/2017.html
ger21
 
Posts: 1143
Joined: Sat Sep 03, 2016 2:17 am

Previous

Return to Report a bug

Who is online

Users browsing this forum: No registered users and 4 guests