Router Config settings

Post anything you want to discuss with others about the software.

Router Config settings

Postby Jim Dandy » Tue May 15, 2018 12:51 am

Hey all, I’m new here and just getting started with cnc. I built a Solsylva machine and am using uccnc software. I am trying to figure out the best Config settings for wood router work. My x axis is a lead screw 3/8-8-4 with 2 start. 4 turns per inch.
Does anyone have an idea of what the velocity and acceleration numbers should be? I calculated the steps per unit at 2546.7 thanks. And if anyone has a router profile they would like to share it would be much appreciated...thanks again...jim
Jim Dandy
Posts: 3
Joined: Wed Dec 20, 2017 3:08 am

Re: Router Config settings

Postby ger21 » Tue May 15, 2018 12:59 am

Velocity and Acceleration settings are very much machine specific, and are best figured out through trial and error testing.
UCCNC 2017 Screenset -
Posts: 1397
Joined: Sat Sep 03, 2016 2:17 am

Return to General discussion about the UCCNC software

Who is online

Users browsing this forum: No registered users and 2 guests