Synchronous O/P M10.1 still under development ???

This is the place to talk about and share things related to CNC plasma machines using UCCNC

Synchronous O/P M10.1 still under development ???

Postby beefy » Fri Feb 23, 2018 8:54 pm

Some time ago, Andrew (Shad) asked for a new synchronous O/P which is not controlled by M3/M5, i.e. completely independent.

Last I heard it was being developed and would be called M10.1 / M11.1

Is this still some time away before it will be ready ?

Cheers,

Keith
beefy
 
Posts: 178
Joined: Mon Sep 05, 2016 10:34 am

Re: Synchronous O/P M10.1 still under development ???

Postby beefy » Sat Feb 24, 2018 4:43 am

This was the thread where Andrew asked for this new feature:

viewtopic.php?f=16&t=948&start=0
beefy
 
Posts: 178
Joined: Mon Sep 05, 2016 10:34 am

Re: Synchronous O/P M10.1 still under development ???

Postby shad » Sat Feb 24, 2018 6:39 am

As far as I know, this has already been implemented and is being tested. Balazs said that the new release will be very soon.
-- Andrew
UC400ETH
UC300ETH-5LPT
NEURON Lite THC
http://neuroncnc.com/
shad
 
Posts: 263
Joined: Thu Sep 15, 2016 5:23 pm

Re: Synchronous O/P M10.1 still under development ???

Postby beefy » Sat Feb 24, 2018 9:35 am

Great, thanks Andrew.
beefy
 
Posts: 178
Joined: Mon Sep 05, 2016 10:34 am

Re: Synchronous O/P M10.1 still under development ???

Postby shad » Sun Feb 25, 2018 4:14 pm

Looks like M10.1/M11.1 commands still not added in the 1.2103 release :(
-- Andrew
UC400ETH
UC300ETH-5LPT
NEURON Lite THC
http://neuroncnc.com/
shad
 
Posts: 263
Joined: Thu Sep 15, 2016 5:23 pm

Re: Synchronous O/P M10.1 still under development ???

Postby shad » Thu May 17, 2018 7:33 am

Hello!
Any news?
-- Andrew
UC400ETH
UC300ETH-5LPT
NEURON Lite THC
http://neuroncnc.com/
shad
 
Posts: 263
Joined: Thu Sep 15, 2016 5:23 pm

Re: Synchronous O/P M10.1 still under development ???

Postby cncdrive » Thu May 17, 2018 3:18 pm

Hi Andrew,

We still working on it sorry. Will be available in next release.
cncdrive
Site Admin
 
Posts: 1849
Joined: Tue Aug 12, 2014 11:17 pm


Return to CNC Plasma

Who is online

Users browsing this forum: No registered users and 0 guests