Synchronous O/P M10.1 still under development ???

This is the place to talk about and share things related to CNC plasma machines using UCCNC

Synchronous O/P M10.1 still under development ???

Postby beefy » Fri Feb 23, 2018 8:54 pm

Some time ago, Andrew (Shad) asked for a new synchronous O/P which is not controlled by M3/M5, i.e. completely independent.

Last I heard it was being developed and would be called M10.1 / M11.1

Is this still some time away before it will be ready ?

Cheers,

Keith
beefy
 
Posts: 449
Joined: Mon Sep 05, 2016 10:34 am

Re: Synchronous O/P M10.1 still under development ???

Postby beefy » Sat Feb 24, 2018 4:43 am

This was the thread where Andrew asked for this new feature:

viewtopic.php?f=16&t=948&start=0
beefy
 
Posts: 449
Joined: Mon Sep 05, 2016 10:34 am

Re: Synchronous O/P M10.1 still under development ???

Postby shad » Sat Feb 24, 2018 6:39 am

As far as I know, this has already been implemented and is being tested. Balazs said that the new release will be very soon.
-- Andrew
UC400ETH
UC300ETH-5LPT
NEURON Lite THC
http://neuroncnc.com/
shad
 
Posts: 331
Joined: Thu Sep 15, 2016 5:23 pm

Re: Synchronous O/P M10.1 still under development ???

Postby beefy » Sat Feb 24, 2018 9:35 am

Great, thanks Andrew.
beefy
 
Posts: 449
Joined: Mon Sep 05, 2016 10:34 am

Re: Synchronous O/P M10.1 still under development ???

Postby shad » Sun Feb 25, 2018 4:14 pm

Looks like M10.1/M11.1 commands still not added in the 1.2103 release :(
-- Andrew
UC400ETH
UC300ETH-5LPT
NEURON Lite THC
http://neuroncnc.com/
shad
 
Posts: 331
Joined: Thu Sep 15, 2016 5:23 pm

Re: Synchronous O/P M10.1 still under development ???

Postby shad » Thu May 17, 2018 7:33 am

Hello!
Any news?
-- Andrew
UC400ETH
UC300ETH-5LPT
NEURON Lite THC
http://neuroncnc.com/
shad
 
Posts: 331
Joined: Thu Sep 15, 2016 5:23 pm

Re: Synchronous O/P M10.1 still under development ???

Postby cncdrive » Thu May 17, 2018 3:18 pm

Hi Andrew,

We still working on it sorry. Will be available in next release.
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm

Re: Synchronous O/P M10.1 still under development ???

Postby cncdrive » Fri Jun 15, 2018 11:12 am

This function is now available in the new 1.2105 test release.
We've added 10pcs of syncronous on/off outputs M10.1 to M10.10 and M11.1 to M11.10
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm

Re: Synchronous O/P M10.1 still under development ???

Postby Robertspark » Fri Jun 15, 2018 11:25 am

I.ll update the macro manual later with the new checkboxes and fields if you're doing any macros / screensets, but I guess that they will just be called directly from within gcode as digital only IO's (not PWM as per M10 Qxxx
+ new Function: int Ismacrorunning(int macronumber)

{note the screenset >> Help >> Supported M-codes has not been updated to M10.1...10}
Robertspark
 
Posts: 1892
Joined: Sat Sep 03, 2016 4:27 pm

Re: Synchronous O/P M10.1 still under development ???

Postby cncdrive » Fri Jun 15, 2018 11:32 am

Hi Rob,

OK, thank you for updating.

The M10.x/M11.x are on/off syncronous switches, they have no parameters, no PWM, they just switch on/off in syncron with the motion.
The Supported M-codes list had been updated, but these codes are not supported by the USB controllers, only the ethernet ones. You probably checked the USB versions screen, those do not support these codes, so those screens do not have these codes listed. You probably checked a USB controller screen.
The UCCNC manual describes that only the ethernet controllers support these.
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm

Next

Return to CNC Plasma

Who is online

Users browsing this forum: No registered users and 4 guests