Homing ignores limit switches

If you think you've found a bug post it here.

Homing ignores limit switches

Postby vdl » Mon Nov 16, 2020 6:04 pm

UCCNC version 1.2111
When homing UCCNC ignores other limit switches. If home input configuration is incorrect then machine runs past limit switches and crashes. I believe while homing it also should look on other limit switches.
Attachments
Default.pro
machine profile with (now) correct homing configuration
(40.24 KiB) Downloaded 419 times
vdl
 
Posts: 5
Joined: Mon Nov 16, 2020 5:59 pm

Re: Homing ignores limit switches

Postby dezsoe » Wed Nov 18, 2020 10:29 am

How was the wrong setting?
dezsoe
 
Posts: 2049
Joined: Sun Mar 12, 2017 4:41 pm
Location: Csörög, Hungary

Re: Homing ignores limit switches

Postby vdl » Wed Nov 18, 2020 12:14 pm

Example.
I'm using limit switch as homing sensor. If i put X+ limit switch as X home sensor then machine goes past X- limit switch and crashes - it stops only when configured home sensor is triggered.

Another example. Homing X axis. While X axis is moving if i put something metalic to any of Y axis limit switches - i see Y limit switches triggering in diagnostics window, but movement is not stopped.
vdl
 
Posts: 5
Joined: Mon Nov 16, 2020 5:59 pm

Re: Homing ignores limit switches

Postby dezsoe » Wed Nov 18, 2020 5:25 pm

OK, I see, thank you!
dezsoe
 
Posts: 2049
Joined: Sun Mar 12, 2017 4:41 pm
Location: Csörög, Hungary


Return to Report a bug

Who is online

Users browsing this forum: No registered users and 16 guests

cron