Is it possible?

If you created a new screenset and want to share it with others then please post it here. You can talk about screens here.

Is it possible?

Postby laki » Thu Apr 11, 2019 7:21 pm

Hello
I am trying to make a new screen set so I have a question about probing the function. Software ver 2109.
I'd like to rearrange the existing probing tab and add a few layers to it. Also, I would set Probing Tab (layer 26) so that his parent tab is layer 1. Will the probing plugin work if I do this?
Probe Tab should look like this with additional layers.

probe.jpg

Link to video
https://www.youtube.com/watch?v=4ly58VOYsEs
laki
 
Posts: 111
Joined: Thu Jul 19, 2018 12:46 am
Location: Belgrade, Serbia

Re: Is it possible?

Postby ger21 » Thu Apr 11, 2019 7:25 pm

It shouldn't matter what layers you use, as long as the button numbers are correct.
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2663
Joined: Sat Sep 03, 2016 2:17 am

Re: Is it possible?

Postby laki » Thu Apr 11, 2019 7:29 pm

Thank you, Gerry
laki
 
Posts: 111
Joined: Thu Jul 19, 2018 12:46 am
Location: Belgrade, Serbia

Re: Is it possible?

Postby thegreatwaldo » Fri Apr 12, 2019 5:48 am

Hi Laki

Nice screenset.
cheers
Andrew
thegreatwaldo
 
Posts: 174
Joined: Tue Sep 06, 2016 8:28 pm

Re: Is it possible?

Postby dezsoe » Fri Apr 12, 2019 6:51 am

Well, it should not matter, but it does. :)

If the Probe layer is selected then the probing plugin changes the active layer to that layer where the selected mode can be found. So, when you select the probe layer then that page will be displayed where the selected mode can be found. I have to think about how to turn it off or automate.

@laki, I send you a PM.
dezsoe
 
Posts: 2049
Joined: Sun Mar 12, 2017 4:41 pm
Location: Csörög, Hungary

Re: Is it possible?

Postby laki » Fri Apr 12, 2019 7:55 am

Thanks Andrew
Dezsoe, I sent you mail to support at cncdrive dot com.
laki
 
Posts: 111
Joined: Thu Jul 19, 2018 12:46 am
Location: Belgrade, Serbia


Return to Custom Screensets

Who is online

Users browsing this forum: No registered users and 1 guest