G95 feed per revolution

Here is where you can request new features or special features.

Re: G95 feed per revolution

Postby Robertspark » Sat Aug 25, 2018 7:10 pm

An attempt at it is better than no attempt at doing it at all.

Mach3 should be the base line of achievement / performance, no?
Rob
Einstein ― “If you can't explain it to a six year old, you don't understand it yourself”
...working my way through the 1000+ ways things don't work to find the one that does
UC400eth, UC300eth, UCCNC v1.2106, Neuron Lite
UCCNC v1.2105 Macro Manual
Robertspark
 
Posts: 1081
Joined: Sat Sep 03, 2016 4:27 pm
Location: Nr Liverpool, England

Re: G95 feed per revolution

Postby cncdrive » Sat Aug 25, 2018 8:44 pm

As I wrote we can probably make it as good or maybe a bit better than in mach3, but we can't do it totally realtime.
cncdrive
Site Admin
 
Posts: 2360
Joined: Tue Aug 12, 2014 11:17 pm

Previous

Return to Feature Request

Who is online

Users browsing this forum: No registered users and 2 guests