by cncdrive » Fri Sep 22, 2017 10:14 pm
There is no difference in the screensets. The screent is the same for the -UB1 and for the -5LPT motherboards.
And there is also only a very minor difference in the firmware, that the -5LPT using a different PWM frequency for the analog output signals than what is used for the -UB1.
We only separated the 2 screensets because the firmware had to be different, so even the difference is minor in the code the 2 motherboards has to be handled separately,
and because if in the future CNCroom wants to add their motherboard specific features/functions to their screenset then there is already a different entry in the screenset file, so it can modified without the need for modifying other screensets.