Make TextFields on the screen ReadOnly

If you created a new screenset and want to share it with others then please post it here. You can talk about screens here.

Make TextFields on the screen ReadOnly

Postby shad » Tue Sep 20, 2016 8:20 pm

Is it possible to add ReadOnly properties for the textFields?
And it's will be great to add Auto-Calculator for input new value to the DRO by mouse click or from touch screen monitors.
Thank you!
-- Andrew
UC400ETH
UC300ETH-5LPT
NEURON Lite THC
http://neuroncnc.com/
shad
 
Posts: 331
Joined: Thu Sep 15, 2016 5:23 pm

Re: Make TextFields on the screen ReadOnly

Postby ger21 » Tue Sep 20, 2016 9:36 pm

If there was a "SetLabel" function, you could use a Label. I've done this in Mach3.
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2663
Joined: Sat Sep 03, 2016 2:17 am

Re: Make TextFields on the screen ReadOnly

Postby cncdrive » Tue Sep 20, 2016 9:45 pm

Andrey,

Yes, you can set the textfield's type property to showfieldnb or showfield then it will be read only.

What do you mean by Auto-Calculator?
I'm not sure if you ment that, but there is an option (checkbox) in the Appearance menu to auto-validate the DROs always when leaving the textfield, then no Enter keyboard key press is required.
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm

Re: Make TextFields on the screen ReadOnly

Postby shad » Tue Sep 20, 2016 10:04 pm

Thank you for information about textfields. I will try.
No, I am about pop up MDI window for input like calculator. For example when you click on the DRO.
Attachments
AutoCalculator.jpg
-- Andrew
UC400ETH
UC300ETH-5LPT
NEURON Lite THC
http://neuroncnc.com/
shad
 
Posts: 331
Joined: Thu Sep 15, 2016 5:23 pm

Re: Make TextFields on the screen ReadOnly

Postby shad » Tue Sep 20, 2016 10:06 pm

showfieldnb property working very well.
Thank you!
-- Andrew
UC400ETH
UC300ETH-5LPT
NEURON Lite THC
http://neuroncnc.com/
shad
 
Posts: 331
Joined: Thu Sep 15, 2016 5:23 pm


Return to Custom Screensets

Who is online

Users browsing this forum: No registered users and 19 guests

cron