2022 ZAuto Zero Probe

[Jimamato]

Good day Folks need some help.
When using the UCCNC 2022 Screenset and I do a simple Z Auto Zero, I get a window saying that my
Z Axis is above the Z home switch. I understand what its telling me however I have idea of how to
deal with it. Any help would be appreciated. Thank you
Jim

[ger21]

Do you have a Z axis home switch? If you do, make sure the Z axis Home Offset is set to 0.
The Z axis in machine coordinates can never go above 0, or the Auto Zero will not work.