Warning

If you created a new screenset and want to share it with others then please post it here. You can talk about screens here.

Warning

Postby ger21 » Thu Nov 03, 2016 4:44 pm

Just a little warning for anyone building a screen from scratch, or doing a lot of editing.
When you click the "Apply Settings" and "Save Settings" buttons, they will reset every single DRO and Checkbox stored in your profile if they are not currently in the screenset.

In my case, I added the two buttons to my "Tools" page, before I had added any other settings pages. While testing them, I basically turned off every single setting in my profile, and set every DRO to read 0.
So, if you are adding those buttons to a screen, you might not want to use them until the screen is complete. :)
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2663
Joined: Sat Sep 03, 2016 2:17 am

Return to Custom Screensets

Who is online

Users browsing this forum: No registered users and 4 guests