Stepcraft Screenset with UI in mind

If you created a new screenset and want to share it with others then please post it here. You can talk about screens here.

Re: Stepcraft Screenset with UI in mind

Postby Roby » Thu Apr 07, 2022 9:53 am

Thank you. I took a look at the code and I see what you mean. Just one more question - is it possible to use functions within the screen file? I could be wrong but it seems like there could be some repetition/duplicated code in the screen file which copuld be moved into a shared function.
Roby
 
Posts: 13
Joined: Sat May 09, 2020 8:31 am

Re: Stepcraft Screenset with UI in mind

Postby ger21 » Thu Apr 07, 2022 12:00 pm

Thanks Gerry. Is this how the Default screenset is implemented


Yes. The screenset file basically contains ±10 different screens.
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2414
Joined: Sat Sep 03, 2016 2:17 am

Re: Stepcraft Screenset with UI in mind

Postby cseyler » Sun Apr 24, 2022 7:52 pm

It is not possible to use function except lambda functions but as soon as you edit and save the screenset through UCCNC, everything is gone and overwritten.

I really find that was a lot easier to write a program that generates the ssf file
cseyler
 
Posts: 60
Joined: Tue May 25, 2021 11:27 am

Re: Stepcraft Screenset with UI in mind

Postby 2046 » Tue Jun 07, 2022 8:17 pm

Screenset with acoustics in mind

The reset sound is bit annoying, especially with the poor compression that makes you think that your speakers are broken or what.
So I made few new sounds.. choose the one you like of any..
I would personally choose the least annoying to your ears and the one that also cuts thru the noise your workshop has and the speakers can handle... well you pick.. ;)
Choose the sound from
https://github.com/twentyfortysix/uccnc ... reen/SOUND
and rename it to reset.wav and replace the ..
/UCCNC/Flashscreen/SOUND/reset.wav

(reset.wav == vibes.wav for now)

The Screenset went thru small updates I have not included yet :mrgreen:
2046
 
Posts: 33
Joined: Fri Feb 25, 2022 10:10 pm

Re: Stepcraft Screenset with UI in mind

Postby 2046 » Sat Jul 09, 2022 11:18 am

Update v 0.04

changes:
- common button have higher contrast in active state (bit more orangy)
- XYZA home buttons are now visually reversed.. meaning they are highlighted when engaged or not set yet.
- the top and front view buttons have new icons that better represent what they are. The view buttons are in slightly different order.
- The SOUND folder has new sound, that works actually (not like those I posted earlier) and has no noise on the end like the original sound that comes with the UCCNC (the seaming delay when something happens and the sound is played comes from the program it self which plays the sound bit later (well that is nothing new, the original sound is played with delay too.. just saying)).

you can get it from: https://github.com/twentyfortysix/uccnc_screenset_2046

note: I left there a TLS user macro button that lets you set all XYZ with TLS sensor.. keep, tweak it or not, it is up to you. see viewtopic.php?f=15&t=3812
Attachments
toolpath.jpg
Toolpath
run.jpg
RUN
2046
 
Posts: 33
Joined: Fri Feb 25, 2022 10:10 pm

Re: Stepcraft Screenset with UI in mind

Postby mmorlan62 » Thu Nov 24, 2022 12:31 am

I've been eagerly awaiting your screenset. There is so much excellent work here. Are you near publishing it?

(I'm an idiot. Didn't page to the last page. Disregard.) :-)

Cheers,

Michael
mmorlan62
 
Posts: 4
Joined: Sat Aug 27, 2022 2:20 pm

Previous

Return to Custom Screensets

Who is online

Users browsing this forum: No registered users and 3 guests