Cylinder head machining

If you milled something cool and you want to show it to others post it here.

Cylinder head machining

Postby Derek » Sat Sep 24, 2016 3:43 pm

Here is a shot of a custom cylinder head I produce. Lots of drilling and semi rigid tapping. I use the probing macros terry wrote for me to do the initial setup on the 4th axis as well as locating features on the raw casting.

Image

I contour machine all of the combustion chambers. .005" step down.

Image

I have a blog at http://www.datsunworks.com/Blog/ That shows the whole process from initial design to where I'm at now.

Derek
Derek
 
Posts: 341
Joined: Mon Sep 05, 2016 9:57 am

Re: Cylinder head machining

Postby Robertspark » Sat Sep 24, 2016 7:44 pm

nice & nice blog, hats off to you
Robertspark
 
Posts: 1892
Joined: Sat Sep 03, 2016 4:27 pm


Return to What you've made with your machine post the pictures, videos here

Who is online

Users browsing this forum: No registered users and 1 guest